Grizzly G0869 vs Dewalt Table Saw

Grizzly G0869 vs Dewalt Table Saw [Explained!]

Table saws are very commonly found equipment in households and carpenter job sites. 

However, people often get confused when choosing between the grizzly G0869 and other Dewalt models. We totally understand if you are one of them and looking for answers. 

So, grizzly g0869 vs DeWalt– which one would be a perfect fit for your home? There are several factors that set these two apart. First, we need to compare their rip capacity. Secondly, their motors should be considered. Thirdly, we weigh their blade size. Fourthly, compare their cutting heights. And finally, we look into their weight and pricing to help you choose one for yourself.

This is just a glimpse of how these two are different. We need much more information about these features to choose one for your home. 

So, what’s the hold up about? Let’s deep dive into it, shall we?

Head to Head Comparison

In this section, we will be taking a sneak peek into the differentiating factors of these two. Let’s begin!

Feature Grizzly G0869 Dewalt
Maximum Rip Capacity 28 inches. 24.5 inches.
Motor Power 2 HP. 1.75 HP.
Blade Size 10 inches. 8 inches.
Cutting Heights Cutting Height at 90 degrees is a maximum of 3-1/8 in. And at 45 degrees, it is 2-1/4 in.  Cutting Height at 90 degrees is a maximum of 4-1/8 in. And at 45 degrees, it is 7-1/4 in. 
Weight 72 lbs. 65 lbs.
Pricing Grizzly G0869 pricing stands around $430. Dewalt pricing stands in a range of $300-$360.

Well, hopefully, now you have a superficial knowledge of how these two are different. 

In the upcoming section, we will be covering these features in a more comprehensive manner. On to the next part!

In-Depth Comparison

We already acquired some insights on the aforementioned factors in the previous section. Now, in this section, we will be discussing them even further. 

Keep reading!

Feature 1: Maximum Rip Capacity

A table saw’s rip capacity is basically a distance. This distance is from the edge of the saw blade to the end of the table. 

The preexisting fence and railing can be adjusted and one side of your table can be extended to boost rip capacity. Or, you can purchase a table extension to enhance your rip capacity.

The max rip capacity offered by the Grizzly G0869 is 28 inches. You can tear a workpiece that is 48 inches wide with a rip capacity of 28 inches.

The majority of the jobs a typical craftsman would encounter can be completed with this rip capacity. The vast majority of portable table saws have this rip capacity.

On the other hand, Dewalt table saws offer a lesser max rip capacity. Their rip capacity is a max of 24.5 inches.


The Grizzly G0869 wins this round with a comparatively higher rip capacity. Dewalt has a much lesser rip capacity. 

Feature 2: Motor Power

Under ideal circumstances, the hp rating depicts maximum production. This frequently involves the blade rotating with no friction from a cut,

This will be referred to as “no-load situations.” Realistically, using a conventional 120-volt outlet won’t allow you to attain your engine’s full horsepower.

If you use your table saw frequently or cut harder hardwoods, you’ll want a higher HP rating. 

An industrial or construction setting will require a table saw offering three or maybe more horsepower.

You can cut wider boards and denser timber with more horsepower. Additionally, it produces more speed, enabling you to cut more quickly.

The Grizzly G0869 runs on a power of 2 HP. Whereas, the Dewalt table saws run on a slightly lesser lower, which is 1.5 HP.


The Grizzly G0869 prevails in this department as well. The extra .5 Hp provides more power and speed.

Feature 3: Blade Size

The Grizzly G0869 is equipped with a standard 10-inch blade. On the other hand, Dewalt table saws come with an 8-inch blade.

Now you might wonder, “the bigger the better, right?” Well, that’s not exactly right.

We usually consider many of the top 10″ saw blades now available on the market. Contrasted to them, the smaller blade’s cut quality is impressive. 

This is due to basic physics; a smaller blade diameter results in even less runout. Now, fewer runout results in a smoother cut.

The blade has much higher leverage when it cuts the stock through. This is due to the smaller diameter’s increased torque at the tooth. These benefits are real and you can definitely spot the difference.

The smaller blades are also much cheaper, quiet, and safer! These two are much better than Miter saws since they sometimes have cutting issues.


Dewalt table saws stand tall in this feature due to their smaller blade size. 

Feature 4: Pricing

Grizzly G0869 pricing stands around $430. In contrast, Dewalt table saw pricing stands in a range of $330-$450.


Dewalt wins again since its price range is versatile. You can adjust to your budget very easily.

This is all we have in store for you in this comprehensive comparison!

Which One Should You Buy?

Well, both these table saws are exceptional and popular among users. But, the decision is yours to make. Your preferences would matter the most in choosing the right one for you.

If you want larger blades, Grizzly G0869. But, if you want your table saw to be quieter, The Dewalt table saws would suit you better.

When your work doesn’t mostly include cutting very deep, Grizzly should be your pick. But if you want cleaner and deeper cuts, Dewalt would do the trick for you. 

Affordability is also an issue. 

Dewalt table saws usually come cheaper. But you can also look around for the more expensive options if you don’t have budget limitations. You can consider between their 708 and 780 models.

We are mentioning more Dewalt table saw models if you’re looking to equip them in job sites:

Product 1
Product 2

In the end, it’s you who takes the shot and chooses the right one!


What factory makes grizzly saws?

Generally speaking, knowing where a table saw was created might give you a sense of its quality. Taiwan is where Grizzly table saws have been produced. Prior to being sent to the United States, Grizzly equipment and tools were manufactured in Asia.

Can I use a 10″ table saw with a 7-inch blade?

Yes, a 7″ blade can be used on a table saw with a 10″ blade. The width of the cut will be reduced, but a smaller blade can still be used. The smaller blade will also produce less noise and waste or sawdust.

Is it preferable if a saw blade has more teeth?

In general, a finer, cleaner cut will be produced by a blade with more teeth, and a rougher cut would be produced by a blade with fewer teeth. Speedy cutting and a lesser cost are advantages of having fewer teeth.

End Note

That’s all for today. Hopefully, now you have your answer regarding grizzly g0869 vs DeWalt.

We will see you soon with more interesting information. 

Till then, it’s goodbye!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top