atd tools reviews

Atd Tools Reviews: Elite 5 Options

Introduction

ATD Tools has specialized in supplying quality automotive tools & equipment at affordable costs since 1977. The brand is still dedicated to supplying high-quality products at a reasonable price 45 years later.

Here, the ATD’s equipment and tools are quality-controlled in the factory. In the field, they guarantee to satisfy the performance & durability requirements that professional mechanics need now and will demand in the future.

So, we got our hands busy with this article. After researching for a while, we’ve provided the atd tools review in this article. That’s not all the information you’ll get here! There’s more! 

In the end, stay tuned to get all the information in some segments. Let’s get on with the reading-

Comparison Table

1. ATD Tools 729 29-Piece Chisel Set

Product Overview


The first ATD product on our list is a punch and chisel set. It’s 29 pieces of punch & Chisel set. And, yes, it’s quite handy and perfect for small works.

Here, it comes with different punches and chisels of various sorts for different applications. For optimal durability, each punch has been toughened and tempered. Even the flat chisels have been hardened to prevent splitting and mushrooming.

Other than that, the longest piece’s length is 8 inches. Added to that, it even comes with a pouch with a roll-up lid. And, when it comes to the built quality of the tools, you’ll be impressed even more. This is because they’re all made up of superior chrome vanadium steel. 

Now, the entire set has a lot of options. This 29-piece punch & chisel set contains (7) pin punches in the following sizes: “3/32 inch,  5/32 inch, 1/8 inch, 3/16 inch,  5/16 inch,1/4 inch, and 3/8 inch, as well as a chisel in the following sizes: 3/32 inch, 5/32 inch, 1/8 inch,  1/4 inch, 3/16 inch, 5/16 inch, and 3/8 inch”. 

There are also 1/4 inches and 5/16 inches cape chisels, 5/16 inches half-round nose chisel, and 5/16 inches & 3/8 inch diamond point chisels. They are composed of chrome vanadium steel of the highest quality.

Pros

  • (7) punches & chisels of various sorts for various applications.
  • For optimal durability, each punch has been toughened and tempered.
  • Flat chisels have been hardened to prevent splitting & mushrooming.
  • Pouch with a roll-up lid
  • Chrome vanadium steel of superior grade built materials is used for toughness.

Cons

  • The edges on the chiseles aren’t straight.

Check the price on Amazon

2. ATD Tools 99650 XL Ratcheting Wrench Set

Product Overview


ATD’s ratcheting sets for XL wrenches are of exceptional quality and performance. They’re made of the chrome vanadium high-cleaned chrome-plated steel. 

All Tech Platinum Sets come with a revolutionary circular spline outline that works on six different types of fasteners: spline, 12-point, 6-point, star/square/torx, and 50 percent adjustable off heads.

Here, the taking out or putting in a bolt will become an easy procedure. In addition, the wrench comes in a set of five, enhancing their capacity to reach places where other tools could not.

For operating in confined areas, the 72-tooth ratcheting mechanism for a 5° and high starting torque swinging arc segment is used. 

Also, the offset box end gear allows recessed fasteners additional access and surface contact.

Pros

  • A sliding switch button allows you to quickly change the ratcheting direction.
  • There are ten metric sizes up to 19 millimeters in length.
  • Access to difficult-to-reach spots is made easier with the addition of a long reach and a 180-degree flex highlight.

Cons

  • The ratcheting mechanisms in these wrenches are weak

Check the price on Amazon

3. ATD Tools 4601 3/8″ 42-Piece Impact Socket Set

Product Overview


A heavy-duty blow-molded casing is used to package the product. The

Dimensions of package is 38.1 L x 8.128 H x 27.94 W (centimeters) and Package is made in China. 9.9 pound weight.

This set includes the following items:  8-Piece Regular Length SAE 5/16″,  1/2″, 3/8″, 7/16″, 9/16″, 11/16″, 5/8″, 3/4″. 8-Piece Long Length SAE 5/16″,1/2″,  3/8″, 7/16″, 5/8″,  9/16″,  11/16″, 3/4″ Standard Length Metric 8mm-19mm in a 12-piece set. Deep Metric 8mm-19mm 12-Piece Set Extension of 3″ Universal Joint is a kind of universal joint.

The best thing about this product is the versatility factor. As you can see, there’s a ton of options available. Due to this factor, you can easily avail any of the tools for your work. It’s quite to choose as well. 

Pros

  • 42-Piece socek set
  • A lot of varieties in sockets
  • A heavy-duty blow-molded casing is used to package the product.

Cons

  • The swivel/elbow did not hold up well.

Check the price on Amazon

4. ATD Tools 4901 1/2″ Drive 29-Piece Impact Socket Set

Product Overview

These incredible impact sockets come with a two-module set that includes SAE and Metric sizes for a variety of applications. Here, it comes with a 3/8″ drive impact socket set as well as a 12″ socket set in two different sizes. 

As a result, it is practical and successful in dealing with any circumstance or application scenario.

Also, this particular set includes the following items: 7/16″ SAE Deep Sizes “1/2″, 5/8″, 9/16″, 11/16″, 13/16″, 3/4″,  7/8″, 1″, 1-1/16″, 15/16″, 1-1/8”. 10-19 mm, 21 mm, 22 mm, 26 mm, 27 mm, Deep Metric Sizes Flip Socket, 3/4″ x 13/16″ Flip Socket, 19mm x 21mm three “Lengthening.

This simple and complete set of SAE and Metric sized sockets allows you to analyze and use in any application or circumstances. Also, it comes in a range of sizes and purposes, allowing them to be used in a multitude of situations.

Its 6-point flanks drives make this simple to line with the fastener’s plane sides and deliver maximum force to release knots. To access hard-to-reach and thinner spaces, it comes with two socket extensions bar sets and adapters. 

As a result, it is very useful and relevant in any situation.

Pros

  • To meet the needs of application and serviceability, a vast variety and big socket sizes are available.
  • Sockets for both SAE & Metric sizes are combined.
  • Both electric & pneumatic impacting tools have a 6-point flank drive.

Cons

  • There isn’t enough room in the carrying case for anything from outer space.

Check the price on Amazon

5. ATD Tools 8699 Master Ball Joint Service Set

Product Overview


The “ATD Tools 8699 Master Ball Joint Service Set” may be used for a variety of jobs, including removing as well as installing ball bearings. Moreover, it can even be used for repairing u-joints or working on braking anchor pins. It’s pretty good for rusted components too. 

All the receiver tubes plus adapters required to work the press-fit top and bottom ball joints over most GM, Ford, including Dodge 2WD & 4WD trucks, vans, and utility vehicles from 1997 are included in this kit.

Also, this one is specifically built for Jeeps & trucks, although it may be used on a wide range of vehicles. It has a big frame with a changeable screw, for those who will be using it regularly, the relatively expensive cost is justified.

Ball joints, U-joints, and truck braking anchor pins are all removed and replaced using this heavy-duty tool. The central forcing screw plug is live. 

Lastly, it’s made of heavy-duty steel and metal. As a result, you can use for years. Also, there’s a molded storage container for easy carrying of tools.

Pros

  • It’s suitable for both old and contemporary automobiles.
  • It weighs around 19 pounds.
  • A sturdy case is included.

Cons

  • C clamp didnt have threads cut in it.

Check the price on Amazon

Buying Guide

So you’ve chosen to get the Atd Tools from Amazon. Because there are so many vendors and alternatives to choose from, it might be difficult to make the final call to Add to Cart. 

However, you may choose the best product based on a number of aspects, including-

Price

Because price is a deciding element for most items, it will have a considerable impact on the Atd Tools you choose. For different reasons some dealers may price the Atd Tools differently. 

A little tip for you! When you purchase these products in bundles, you may save a lot of money. So, check out a few different options to get the best bargain for you.

Longevity

ATD’s Deep impact sockets are the finest alternative with length if you have difficult-to-reach bolts. For industrialists and seasoned employees, they are a must-have choice.

If working with larger equipment requires more focus, “Ratcheting Wrench Set” is the way to go. Otherwise, shallow impact socket sets are a good option since they give a basic length of gear and may handle basic demands and simple machines.

Function

Before you purchase anything, you should consider why you’re purchasing this in the first place. Answering these questions will provide you with more information that will assist you in choosing the finest Atd Tools for you. 

If it’s a first-use item, you might not want to spend as much as you would if it’s a product you’ll use every day for a long time.

Service

It’s also important to consider how long you plan to utilize Atd Tools. Check the product description to discover how long Atd Tools will last at full capacity and if you’ll need to fix or replace it later. 

Compare this time frame and consider if it is worth purchasing or if you could obtain a more costly one that will last longer.

FAQs

Question: What is the difference between impact and regular sockets?

Answer: Regular sockets are not high-pressure, high-torque sockets, while impact sockets are. Impact sockets differ from conventional sockets in terms of color, shape, and material details, as well as application.

Question: What items does Atd (Advanced Tool Design) sell?

Answer: Atd primarily offers hand tools, such as pliers, barrel gasoline pumps, and putty knives. If you’re seeking these items, Atd can be a good option.

Question: Who are the Atd product manufacturers?

Answer: ATD Tools, ATD produces the majority of Atd (Advanced Tool Design) items. The manufacturers offer a consistent supply of items to Atd (Advanced Tool Design), and they have an excellent working relationship.

Final Words

Finally, as you’ve read the Atd Tools Reviews, you’ll know that the ATD Tools are fantastic for a variety of applications. If you currently own some other company tools, you should invest in the finest ATD tools. 

It is always beneficial and convenient for your business or domestic application. It comes with a variety of options and pricing possibilities. Depending on your demands and budget, you should go for the ATD tools.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top