franklin m150 vs 710

The Franklin m150 vs 710[ Review, Specification, And Comparison]

Introduction

So you’re looking for a new stud finding tool for your toolbox. But don’t know which one is the exact product for you? The Franklin m150 and 710 are both great tools for finding wall studs. We have the answer!

So, among the Franklin m150 vs 710, which is better?

The franklin m150 and 710 are wall stud locating tools with usability differences. You can use the two of them for the same task. But one each specializes in finding studs in different situations. One is larger and the other can be used to locate electric lines.

In this article, we will go show you the use of both tools. And which tool is better in which situation. 

Franklin M150

The Franklin M150 is a US-made product used to find wall studs underneath the surface of the wall. It is one of the new age, less expensive options for a stud finding tool. 

The stud finder uses state-of-the-art X-ray technology to locate the studs. Then it depicts the certain location of the stud. The  LED lights attached to the device find it. The screen is 5 inches in length. And is battery powered.

The stud finder is compact and is an easy addition to your toolbox. As it doesn’t take up space, you will find it easy to carry it with you. It can scan 1.5 inches deep underneath the wall. And can also locate metal studs.

Specifies the breadth of concealed objects or studs. So that you can not only see where they are concealed but also know how big they are. It uses 15 LED points to identify the studs.

The M150 is one of the cheaper stud finders. It comes at an official website price of $36.

Franklin 710

Now if we take a look at the 710 it too is a product of Franklin. It is used to find wall studs underneath the surface of the wall.

The stud finder locates the studs using cutting-edge X-ray technology. The stud’s exact location is then revealed. LED lights are used in conjunction with the device. 

The screen is 7.5 inches in length. And is battery powered. It can also detect through some insolation materials. Be it in your ceiling or wall. 

The stud Finder is small and lightweight, making it a convenient addition to your toolbox. You will find it easy to carry it with you because it does not take up much room. 

It can scan 1.6 inches beneath the surface of the wall. Metal studs can also be found. It is larger than the M150 model.

Numerous studs can be identified at the same time. It uses 13 LED points to identify the studs.

You should also invest in a proper drill for more accurate work. We have suggested some.

Product 1
Product 2

So, to ensure a straight mark and a proper position of the stud, this feature is excellent. And besides this, the feature also increases accuracy. The 710 is a midrange tool. It is priced at $54 on the official website.

So, these were the features of the two devices. As mentioned before, they are quite similar as they are from the same manufacturer.

Quick Comparison

These two devices are used for the same basic work but have different functions. So here are some of the main differences at a quick glance.

Differences Franklin m150 Franklin 710
Size Smaller of the two Larger of the two
Features Built-in live wire detector Built-in bubble level
Price Officially priced at $36 Officially priced at $54

So at a quick glance, these are the main differences between the franklin products. 

Features Compared

In the article, we will describe the detailed comparison by mentioning the features of the devices. As both devices are from the same company they may have many similarities.

Built-In Live Wire Locator

The M150 also comes with a feature of detecting live wires. There may be a wire underneath the wall with active electricity flowing through it. In those cases, the M150 can detect them. And display them with the use of two distinctive markers.

This feature can decrease the risk of drilling into live wires. This will also help avoid drill chuck issues. And can find out the exact position of the wire as well. But the 710 doesn’t have this feature.

Built-In Bubble Level

The 710 has an additional feature of a bubble level. Being a stud finder, the device is mainly used to locate positions for drilling a level that is very useful. A bubble level can confirm if the marks being placed are parallel or not. 

This model doesn’t have a live wire detector. So, you have the risk of damaging wirings and sockets. But the M150 doesn’t have this feature either

Final Decision

The two stud finders work similarly. And so have very minor differences. But if you had to choose your decision should be based on your use.

If you want a stud finder that can also detect live wires, use the M150. It has this feature and can prevent a lot of accidents.

On the other hand, if you want a more quick and accurate stud finder, use the 710. Its wider range and features make it the quickest and most accurate one of the two.

FAQs

Question: Who is the inventor of the stud finder?

Answer: A man named Robert Franklin invented and perfected the electric stud finder.

Question: Is it possible to use a stud finder on a plaster wall?

Answer: Standard stud finders don’t work on lath and plaster because they detect a change in density inside the wall.

Question: What is the best way to use a ProSensor M150?

Answer: Simply push and hold the button to turn on the ProSensor M150, then hang it on the wall. There is no technique for calibration. You can find studs in a matter of seconds.

Conclusion

You now know the difference between Franklin m150 vs 710. We don’t think there’s any more doubt in your mind about which of these two to pick!

Then go for it without hesitation. Best of luck to you!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top